Why Kwik-Switch outsells all other tool change systems 4:1. Why Kwik-Switch outsells all other tool change systems 4:1. Kwik-Switch
was designed from the ground up to provide optimum performance and efficiency in a tool
holding system that allows tools to be changed in a few seconds.
Whereas other systems use a (non-locking) Milling Machine Taper shank, Kwik-Switch uses a self-locking shallow-angle taper. This feature provides several unique advantages.
Greater driving power/accuracy. The locking angle taper provides
a more rigid seat for the tool adapter and allows it to withstand greater cutting forces
and vibration without allowing the tool adapter to loosen. Further, with constant locking
force (as described above) always present, Kwik-Switch further guards against tool drop
out" or loose-tool damage.
These features also allow higher horsepower to be transmitted, which means higher feed
rates—more machine output. Work accuracy is also improved by minimizing tool
deflection and Kwik-Switch is manufactured to closer tolerances than other systems -
run-out of the spindle or holder is guaranteed to be .0005" T.I.R. or less up to
4" from the socket. The locking angle taper provides
a more rigid seat for the tool adapter and allows it to withstand greater cutting forces
and vibration without allowing the tool adapter to loosen. Further, with constant locking
force (as described above) always present, Kwik-Switch further guards against tool drop
out" or loose-tool damage.
These features also allow higher horsepower to be transmitted, which means higher feed
rates—more machine output. Work accuracy is also improved by minimizing tool
deflection and Kwik-Switch is manufactured to closer tolerances than other systems -
run-out of the spindle or holder is guaranteed to be .0005" T.I.R. or less up to
4" from the socket.
Smaller, more rugged lock nuts. Kwik-Switch II lock nuts are considerably smaller in diameter—as much as 27% in a popular size. Further, the rugged integral lugs that retain the adapter are up to 50% thicker and heavier. Kwik-Switch II lock nuts are considerably smaller in diameter—as much as 27% in a popular size. Further, the rugged integral lugs that retain the adapter are up to 50% thicker and heavier.
Available on new machines or easily retrofitted to old ones. Kwik-Switch
II automatic locking spindles are available as original equipment on all new machines
including all Bridgeport models. Just ask your machine supplier or contact Universal for
details on how to order. Kwik-Switch II automatic locking holders are available to fit all
machines. Thus, you can enjoy the benefits of Kwik-Switch on your older machines.
Interchangeable collet system. Only Universal offers you Acura-System, our family
of interchangeable task-matched collets. Each collet is designed to optimize performance
on a particular type of operation. Since several collets in the system will fit the same
chuck body, you can turn out more accurate work, faster, and with fewer collet chucks
required. More details on Acura-System follow.Kwik-Switch
II automatic locking spindles are available as original equipment on all new machines
including all Bridgeport models. Just ask your machine supplier or contact Universal for
details on how to order. Kwik-Switch II automatic locking holders are available to fit all
machines. Thus, you can enjoy the benefits of Kwik-Switch on your older machines.
Interchangeable collet system. Only Universal offers you Acura-System, our family
of interchangeable task-matched collets. Each collet is designed to optimize performance
on a particular type of operation. Since several collets in the system will fit the same
chuck body, you can turn out more accurate work, faster, and with fewer collet chucks
required. More details on Acura-System follow.
Universal Engineering / DeVlieg® Tooling Systems / Tool Preset Service & Calibration
Last updated 02/10/2007