Select the proper locking ring to clamp onto the cutting tool and control the projection of the tool.
- Place the locking ring over the cutting tool, adjust to the proper depth and clamp in place using the locking screw.
- Insert the Tool Shank into the heat expanded bore of the toolholder.
- When the Toolholder cools and the shank is clamped, remove the locking ring.
- Tool and Toolholder are ready for use.
Inch PART
NO. A B C 4617212 0.3750 1.50 0.5000 4617213 0.5000 1.50 0.5000 4617214 0.6250 1.75 0.5000 4617215 0.7500 1.75 0.5000 4617216 1.0000 2.00 0.5000 4617217 1.2500 2.25 0.5000 4617218 1.5000 2.50 0.5000 4617219 2.0000 3.00 0.5000 PART
NO. A B C 4617220 6.000mm 1.50 0.5000 4617221 10.000mm 1.50 0.5000 4617222 12.000mm 1.50 0.5000 4617223 16.000mm 1.75 0.5000 4617224 20.000mm 1.75 0.5000 4617225 25.000mm 2.00 0.5000 4617226 32.000mm 2.25 0.5000
Metric
Universal Engineering / DeVlieg® Tooling Systems / Tool Preset Service & Calibration
Last updated 02/10/2007